Информационный сервер для программистов: Исходники со всего света. Паскальные исходники со всего света
  Powered by Поисковый сервер Яndex: Найдется ВСЁ!
На Главную Исходники Форум Информер Страны мира
   Приемы Вызова Программ    >>    call32nt
   
 
 Call32NT - Call 32-bit DLL from 16-bit Application   Christian Ghisler 28.06.1995

Модуль, позволяющий делать вызов 32-разрядных функций под Windows-9x/NT для 16-битных программ, написанных на BP7, BPW и Delphi-1.
Call 32-bit DLLs from 16-bit Delphi/TPW! This unit allows you to call most 32-bit functions in Windows 95 and Windows NT from your 16 bit Delphi or Turbo Pascal application! Public domain inc. source.



22k 
 

CALL32nt.pas: Library for Delphi/TPW/BPW to call 32 bit functions in Windows NT or Windows 95 Adapted to Pascal by Christian Ghisler, CIS: 100332,1175 from CALL32.DLL, a DLL for Visual Basic written and placed in the Public Domain by Peter Golde. This unit is placed in the public domain. Please feel free to redistribute as you wish. No guarantees are made as to its suitability or usefulness, and no support can be provided. CALL32NT.PAS is a Unit that can be used for calling routines in 32-bit DLLs on the Microsoft(R) Windows NT(TM) and/or Windows 95(TM) operating system. It cannot be used on Windows(TM) 3.1, Win32s(TM), or other operating systems. Using it, a Delphi, Turbo or Borland Pascal program, running in the Win16 subsystem, can declare and call functions in any 32-bit DLL (including, but not limited to, the system DLLs). Directories in ZIP file (unzip with pkunzip -d): root: call32nt.pas the unit to call 32 bit functions from Delphi/TPW/BPW delphi: sample source of a Delphi program calling 32-bit code (exe not incuded) tpw-bpw: sample source and exe of a TPW/BPW wincrt program calling 32-bit code longname: some 32-bit functions which use long filenames, ready to be called ---------------- CALL32nt.pas: Library for Delphi/TPW/BPW to call 32 bit functions in Windows NT or Windows 95 Adapted to Pascal by Christian Ghisler from CALL32.DLL, a DLL for Visual Basic written and placed in the Public Domain by Peter Golde This unit is placed in the public domain. Please feel free to redistribute as you wish. No guarantees are made as to its suitability or usefulness, and no support can be provided. To call a function in a 32-bit DLL, follow these steps: 1. Declare the function you wish to call. Declare it in the ordinary fashion, with the following exceptions: > Declare it as a function variable > Add an additional argument at the end, of type Longint: For example, if you are calling the function: (C code) GetWindowText(HWND hwnd, LPSTR lpsz, int cch) declare it as follows (remember that ints and all handles are 32 bits, so use a Longint): var GetWindowText:function(hwnd:Longint;lpsz:PChar; cch:longint;id:Longint):Longint; 2. Each function needs an identifier to distinguish the function from other called functions. Declare this identifier in a var block. For the above example: var id_GetWindowText:longint; 3. In the initialization section of your application, set the address of the called function to the address of Call32: @GetWindowtext:=@Call32; 4. Also in the initialization section of your application, declare the actual library and name of the function you want to call with the Declare32 function. Pass it the name of the function (CASE SENSITIVE!!!), the library name, and a string describing the argument types. Each letter in the string declares the type of one argument, and should be either "i" for a 32-bit integer or handle type, "p" for any pointer type, or "w" for an HWND parameter to which you want to pass a 16-bit HWND and have it be automatically converted to a 32-bit HWND. Save the return value of Declare32 in a global variable to pass as the last parameter to the function you declared earlier. So, in continuing the example, you would call: id_GetWindowText:=Declare32('GetWindowText','user32','wpi'); (As a side note, this more properly would be declared as 'GetWindowTextA', since this is the real exported name. However, Declare32 will automatically add an 'A' to the end of a function name if necessary.) To call the function, you would call: cbCopy:=GetWindowText(hwnd, sz, cb, id_GetWindowText); It is important to use the correct data types when calling DLL functions. There are two important points to pay attention to when using CALL32NT.PAS. First, only 32-bit integers can be passed to a DLL procedure. Since virtually all 32-bit functions take int, UINT, LONG, DWORD, or HANDLE parameters, which are all 32 bits, this is not a major restriction. However, you must remember to always declare function arguments as Longint, not Integer. Second, 16-bit handles and 32-bit handles are not interchangeable. For example, a 16-bit bitmap handle that you get from calling a 16-bit DLL or from the Delphi/TPW environment cannot be passed to a 32-bit function expecting a bitmap handle. Similarly, a 32-bit handle obtained from a 32-bit function cannot be passed to a 16- bit DLL. The only exception is window handles (HWND). If you declare a function parameter with the "w" letter in the argument description string passed to Declare32, the corresponding parameter will be automatically converted from a 16-bit HWND to a 32-bit HWND when the call is made. You must still declare the argument as a LONG. This is convenient, for example, when passing the value returned by the "handle" property of a form/control to a 32-bit DLL function. Only windows created by your application can be translated. The following is a summary of data types: C data type Type specified in Declare Character for Declare32 int, UINT Longint i LONG, DWORD Longint i HANDLE Longint i WORD, short not supported HWND Longint w (i for no 16->32 translation) LPSTR PChar p LPLONG, LPDWORD, LPUINT, int FAR * VAR x:Longint p LPWORD VAR x:Word p Note on Declare32 function names: Declare32 will automatically try three different names for the function name you pass in. First, it uses the exact name you pass in. If it doesn't find that function name, it converts the name to the stdcall decorated name convention by adding an underscore at the beginning and adding "@nn" at the end, where "nn" is the number of bytes of arguments. If it doesn't find that name, it adds an "A" to the end of the original name to try the Win32(R) ANSI function calling convention. If there occurs an error in Declare32, the returned id will be less than 0. Also, the variable Call32NTError will be set, so you only have to check one variable to check that all went well. You can use this variable to distinguish between Windows 3.1 and Windows NT/95: if Call32NTError is false, you can use the declared 32-bit functions, otherwise you must use 16-bit replacement functions. This allows you to write programs which work in both 16 and 32 bit environments. If you have to pass a record containing a pointer, you must use the function GetVDMPointer32W to create a 0:32 pointer from your 16:16 pointer. This unit is, like the original DLL, in the public domain. Feel free to redistribute as you wish. No guarantees are made as to its suitability or usefulness, and no support is provided. Please send bug reports to my CIS address 100332,1175. CALL32NT requires the Microsoft Windows NT operating system or Windows 95 Preview or later to perform its task. The program will also run in Win 3.1, but of course the functions will not work.